Triple Voltage DC Distribution Box
HES Snap Box
OVERVIEW
The HES Snap Box was designed for use with the Series 401/451 Controllers. The box brings all three (3) DC output voltages from the Controller to the work surface in a single cable. At the work surface, the Snap Box provides three Barrel Plug outputs at 5 VDC, 12 VDC and 19.5 VDC.
KEY FEATURES
- Designed for use with the Series 401/451 Controllers
- Brings all three (3) DC output voltages from the Controller to the work surface in a single cable
Reliability
- Reliable
- Efficient
Gallery
Product Specification
| Weight | |
|---|---|
| Full | 1560 kg (3450 lb) |
| All ORELs, NVG PAPIs, MSUs and drill removed | 1385 kg (3050 lb approx.) |
| Vehicle Details | |
|---|---|
| Nose load (approx. – with Trailer level) | <100kg (221lb) |
| Wheel Rim | Pressed steel, 5.5″ x 14″ |
| Tyre | 185 R14C8PR |
| Tyre pressure | 4.5 bar (65 psi) |
| Brakes | Internal Expanding Drum. Auto- Reversing Type |
| Wheel bearing end float adjustment | 0.15mm (0.006″) MAXIMUM |
| Hitch (coupling) | Hydraulically damped overrun mechanism. Fitted with 76mm NATO EYE as standard (others available), plus over-centre hand brake. |
| Trailer Lighting | |
|---|---|
| Light fittings | 12/24 V, EEC approved fittings as standard |
| Inter-vehicle connector | 12 pin NATO plug |
| Torque Settings | |
|---|---|
| Wheel nuts | 50lb ft (67NM) |
| Hitch to ‘A’ Frame, fixings | 65lb ft (88NM) |
| Axle to spring clamp, fixings | 55lb ft (74NM) |
| Suspension to Chassis, fixings | 35 to 40 lb-ft |
Custom Cords and Cables
HES DC Distribution Box
OVERVIEW
HES manufactures and distributes a variety of application specific Power Cords and Cables. These products allow for ease and convenience to address wire and cable management on Mobile devices.
KEY FEATURES
- Allows for ease and convenience to address wire and cable management on Mobile devices
Reliability
- Reliable
- Efficient
Single Voltage DC Distribution Box
HES DC Distribution Box
OVERVIEW
The HES DC Distribution Box is ideal for bringing up a single DC output from the base of the mobile device up to the work surface. At the work surface it provides three (3) circular DIN outputs to power three individual DC loads.
KEY FEATURES
- Provides three (3) circular DIN outputs to power three individual DC loads.
Reliability
- Reliable
- Efficient
Gallery
Product Specification
| Dimensions (Nominal) | |
|---|---|
| Height (overall-laden with doors closed) | 1800mm (71 inches) |
| Length (overall) | 3734mm (147 inches) |
| Width (overall) | 1644mm (65 inches) |
| Track | 1112mm (44inches) |
| Weight | |
|---|---|
| Full | 1560 kg (3450 lb) |
| All ORELs, NVG PAPIs, MSUs and drill removed | 1385 kg (3050 lb approx.) |
| Vehicle Details | |
|---|---|
| Nose load (approx. – with Trailer level) | <100kg (221lb) |
| Wheel Rim | Pressed steel, 5.5″ x 14″ |
| Tyre | 185 R14C8PR |
| Tyre pressure | 4.5 bar (65 psi) |
| Brakes | Internal Expanding Drum. Auto- Reversing Type |
| Wheel bearing end float adjustment | 0.15mm (0.006″) MAXIMUM |
| Hitch (coupling) | Hydraulically damped overrun mechanism. Fitted with 76mm NATO EYE as standard (others available), plus over-centre hand brake. |
| Trailer Lighting | |
|---|---|
| Light fittings | 12/24 V, EEC approved fittings as standard |
| Inter-vehicle connector | 12 pin NATO plug |
| Torque Settings | |
|---|---|
| Wheel nuts | 50lb ft (67NM) |
| Hitch to ‘A’ Frame, fixings | 65lb ft (88NM) |
| Axle to spring clamp, fixings | 55lb ft (74NM) |
| Suspension to Chassis, fixings | 35 to 40 lb-ft |